Ski wax recommendation Černá hora/Janské Lázně — Krkonoše
Černá hora/Janské Lázně is located in Krkonoše (Czechia) at an altitude of 620 to 1,260 m. The resort offers an elevation difference of 640 metres. Choosing the right ski wax depends primarily on snow temperature, snow type and moisture — factors that change markedly with altitude.
Snow conditions in Černá hora/Janské Lázně
At the reference altitude of 940 m, Černá hora/Janské Lázně typically offers often machine-made and compact old snow with higher moisture. At lower altitudes below 1,800 m, machine-made and compact old snow often dominate. Both sit closer to the melting point, which favours warm and universal waxes — the calculation gives the final answer.
Which ski wax for Černá hora/Janské Lázně?
Based on the altitude and typical conditions in Černá hora/Janské Lázně, primarily warm wax products are recommended. From the raceday.ski range of 127 wax products (Swix, Toko, Holmenkol, HWK and Rex), the algorithm selects the optimal wax system of base wax, race wax, optional powder and finish in race mode — a single matching wax in hobby mode.
For the altitudes in Černá hora/Janské Lázně, warm waxes such as Swix HS8 Red, Toko Performance Hot Wax Yellow, Holmenkol Alpha Mix Yellow or HWK HX Racewax Warm are suitable. On machine-made snow, dedicated artificial-snow waxes tuned to the higher moisture and aggressiveness are also recommended.
How the wax recommendation works
raceday.ski calculates the wax recommendation for Černá hora/Janské Lázně from current Open-Meteo weather data. The algorithm considers:
- Snow temperature — calculated from air temperature, altitude (940 m), cloud cover and solar radiation
- Snow type — determined automatically from precipitation data of the last 48 hours (fresh snow, old snow, machine-made, wet snow, slush or wind-packed)
- Moisture — according to the ICSSG classification (dry, moist, wet, very wet, soaked)
- 127 wax products — from 5 leading manufacturers: Swix (Norway), Toko (Switzerland), Holmenkol (Germany), HWK (Austria) and Rex (Finland)
In race mode, the result is a complete wax system with base wax, race wax, optional powder and finish, structure recommendation and brushing protocol — in hobby mode, a single matching wax. Calculated individually for the current conditions in Černá hora/Janské Lázně.
Ski wax knowledge
You can find in-depth information about ski wax in our articles:
- Ski wax temperature table — Which wax at which temperature?
- How to wax skis — guide — Step by step to a perfectly waxed ski
- Wax for artificial snow — Special tips for machine-made slopes
- Base wax vs. race wax — The difference explained
- Ski wax for beginners — Beginner's guide
Černá hora/Janské Lázně — resort overview
The Černá hora/Janské Lázně ski resort is located in Krkonoše, Czechia and extends from 620 to 1,260 m. For the best wax recommendation, we suggest setting the reference altitude to the altitude of your race slope or the runs you ski most.